35
LSQT1161
Setup
Use the direction buttons (3,4,2,1) and
ENTER button in place of the joystick on the
main unit.
3Press the MENU button to exit

the menu screen.

Setting date and time
When the unit is turned on for the first time, a
message asking you to set the date and time will
appear.
Select [YES] and press the joystick. Perform
steps 2 and 3 below to set the date and time.
If the screen shows the incorrect date and time,
then adjust it.
¬Rotate the mode dial to select or
.
1Press the MENU button, then

select [BASIC] # [CLOCK SET]

# [YES] and press the joystick.

2Move the joystick left or right to

select the item to be set. Then,

move the joystick up or down to

set the desired value.

The year will change as follows:
2000, 2001, ..., 2099, 2000, ...
The 24-hour system is used to display the time.
3Press the joystick to enter the

selection.

The clock function starts at [00] seconds when
the joystick is pressed.
After pressing the MENU button to finish the
setting, check the date and time display.
Changing the date and time display style
Press the MENU button, then select [SETUP]
# [DATE/TIME] # desired display style and
press the joystick.
You can also show or change the date and
time display by repeatedly pressing the DATE/
TIME button on the remote control.
(VDR-D310)
Changing the display style
Press the MENU button, then select [SETUP]
# [DATE FORMAT] # desired display style
and press the joystick.
MENU
ENTER
MENU
[DATE] [D/T]
[OFF]
Display style Screen display
[Y/M/D] 2007.12.15
[M/D/Y] 12.15.2007
[D/M/Y] 15.12.2007
15.12.2007 15:30
15.12.2007
LSQT1161_GN.book 35 ページ 2007年1月19日 金曜日 午後1時8分