56
LSQT1161
Recording
2Move the joystick left or right to

select [ ] (aperture) or [ ]

(shutter speed).

3Move the joystick left or right to

make the adjustment.

AShutter speed:
1/50 to 1/8000
1/25 to 1/2000 (VDR-D310)
1/50 to 1/500 (VDR-D220)
The shutter speed closer to 1/8000 is
faster.
BIris/Gain value:
CLOSE # (F16 to F2.0) # OPEN #
(0dB to 18dB)
Value closer to [CLOSE] darken the image.
Value closer to [18dB] brighten the image.
When the iris value is adjusted to brighter
than [OPEN], it changes to the gain value.

To restore to automatic adjustment

Set the AUTO/MANUAL/FOCUS switch to
AUTO.
When setting both the shutter speed and the
iris/gain value, set the shutter speed and then
set the iris/gain value.
Manual shutter speed adjustment
Avoid recording under fluorescent light,
mercury light or sodium light because the
colour and brightness of the playback image
may change.
If you increase the shutter speed manually, the
gain value will increase automatically
depending on how much the sensitivity lowers
and the noise on the screen may increase.
You may see vertical lines of light in the
playback image of a brightly shining subject or
highly reflective subject, but this is not a
malfunction.
During normal playback, image movement
may not look smooth.
When recording in an extremely bright place,
the screen may change colour or flicker. If so
adjust the shutter speed manually to [1/50] or
[1/100].
Manual iris/gain adjustment
If the gain value is increased, the noise on the
screen increases.
Depending on the zoom magnification, there
are iris values that are not displayed.
MNL
3/3
3/3
NEXT
NEXT
3/3
NEXT
OPEN
OPEN
1/
100
100
1/100
OPEN
MNL
BACK
BACK
BACK
A
B
LSQT1161_GN.book 56 ページ 2007年1月19日 金曜日 午後1時8分