Troubleshooting

Before asking for repair of the projector, check the following. If the symptom persists, stop using the projector, be sure to unplug the power plug, and then contact your dealer.

No image appears on the screen.

Problem

Solution

 

 

 

 

 

 

 

 

Power can not be

• Check whether the indicators are on or off and how they are lightning.

turned on.

 

 

 

 

 

 

 

 

 

 

 

POWER

STATUS

 

Solution

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connect the power cord to the projector.

 

 

Off

Off

Plug the power cord into a wall outlet.

 

 

 

 

 

 

 

 

• Turn on the main power swich.

 

 

 

 

 

 

 

 

 

If any objects are blocking the air inlet or outlet grille, remove them and carry

 

 

 

 

 

 

 

 

 

out the following.

 

 

 

 

 

 

 

 

 

1. Turn off the main power swich.

 

 

 

Off

 

2. Make sure that the projector has cooled off.

 

 

 

 

 

 

 

 

 

3. Turn on the main power swich.

 

 

 

 

 

 

 

 

 

4. Press the POWER button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If any objects are blocking the air inlet or outlet grille, remove them.

 

 

 

 

 

 

 

 

 

 

Steady red

Blinking

Don't expose the air outlet grilles to hot air emitted from a heating appliance.

 

 

Check wheather the filter is clogged with dirt and dust.

 

 

 

orange

 

 

 

 

￿Clean the filter, if clogged. (See page 41.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

After the STATUS indicator stops blinking, press the POWER button.

 

 

 

 

 

 

 

 

 

 

 

Blinking

 

• If the main power switch is turned off while the fan is rotating, the lamp may not turn on about 1 minute

 

 

 

 

when the main power switch is turned on next time.

 

 

 

green

 

• The lamp can't turn on again for 1 minute after it goes out.

 

 

 

 

 

 

 

 

Press the POWER button several times.

 

 

 

 

 

 

 

 

 

 

 

 

Replace the lamp. (The lamp is at the end of its life.)

 

 

 

 

 

 

 

Steady red

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Off

Attach the lamp cover on the bottom.

 

 

 

 

 

 

 

Attach the filter cover on the bottom.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blinking

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Unplug the power cord from the wall outlet and contact your dealer.

 

 

red / green

Steady

 

 

 

 

 

 

 

 

 

 

or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blinking

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No image appears on

• Cancel the AV mute by pressing the AV MUTE button.

the screen.

• Check that the lens cap is removed.

It may take about 1 minute for the lamp to light up.

The lamp fails to light up on rare occasions. In such a case, wait for a few minutes and then try again.

If the projector was turned off before the lamp was cooled down sufficiently last time, the fan may start rotating and the POWER button may not work after the main power switch is turned on. After the fan stops rotating, press the POWER button to turn back on the POWER indicator.

Set SCART INPUT in the FEATURE menu to OFF. (See page 25.)

Check that the intake vent is clean.

Check that the lamp cover and the filter cover are closed. (See pages 39 and 41.)

Check that the cables connected to the external devices are not broken.

When an extension cable is being used, replace it with the supplied cable for check. When images are displayed correctly, add an RGB signal amplifier to the extension cable.

Power turns off.

• This problem may occur when the intake vent and/or exhaust vents are blocked. (In

 

such a case, the STATUS indicator brinks orange.)

 

J Remove the objects blocking the intake vent and/or exhaust vents and then carry

 

 

out the following procedure.

 

1.

Wait for the intake fan and/or exhaust fan to stop. (Wait until the STATUS indicator

 

 

goes out.)

 

2.

Turn off the main power switch.

 

3.

Wait about 10 minutes.

 

4.

Turn on the main power switch.

 

5.

Press the POWER button.

 

• When the STATUS indicator is steady red, it is indicating that the lamp should be

 

replaced. Replace the lamp in this case.

 

• Check that AUTO POWER OFF has been set to OFF.

 

• If the lamp has deteriorated, it may go out after a while it illuminates.

The screen for entering

• PASSWORD FUNCTION in the FEATURE menu has been set to DISPLAY INPUT

 

to

the password appears.

enable the password lock.

JEnter the password or contact the person in charge of management of the projector. (See page 33.)

EN-42

Page 42
Image 42
Mitsubishi Electronics FL7000 user manual Troubleshooting, No image appears on the screen

FL7000 specifications

Mitsubishi Electronics has once again showcased its commitment to innovation with the launch of the FL7000 series, a cutting-edge display technology aimed at enhancing visual experiences across various sectors including retail, corporate, and entertainment. The FL7000 series is engineered to deliver stunning image quality, versatility, and advanced features that facilitate seamless integration and usability.

One of the standout characteristics of the FL7000 series is its impressive resolution. With 4K Ultra HD capabilities, it provides crystal-clear images with rich detail, making it an ideal choice for presentations, advertisements, and visual displays. The high brightness levels ensure that images remain vibrant even in well-lit environments, which is crucial for retail and public spaces.

The FL7000 series includes advanced image processing technologies that enhance color accuracy and contrast. With a wide color gamut, it can reproduce a broader spectrum of colors, allowing images to appear more lifelike. The incorporation of HDR (High Dynamic Range) technology further elevates the viewing experience by providing deeper blacks and brighter whites, which is essential for dynamic visual content.

Flexibility and ease of use are other key features of the FL7000 series. The displays are designed for easy installation and integration into existing setups, whether as part of a corporate conference room, a digital signage solution, or a creative installation. The modular design allows for configurations that can adapt to various space constraints and customer needs.

Mitsubishi also emphasizes connectivity in the FL7000 series. The displays come equipped with multiple input options, including HDMI, DisplayPort, and USB interfaces, enabling compatibility with a wide range of media sources. This versatility empowers users to easily switch between different content, making it suitable for dynamic environments.

Additionally, the FL7000 series features an intuitive user interface that simplifies operation and management. Users can configure settings, schedule content, and even manage multiple displays through an integrated software solution, streamlining workflows and enhancing productivity.

In conclusion, the Mitsubishi Electronics FL7000 series sets a new benchmark for display technology, combining high-resolution imaging, advanced processing capabilities, and flexible installation options. Whether used for business, educational purposes, or retail applications, the FL7000 series is poised to transform the way visual information is presented and consumed. With its robust features and technological advancements, it represents a significant advancement in the realm of display solutions.