Lanier 5622 AG manual Configuring the Network with the Operation Panel, Interface Settings/Network

Configuring the Network

Configuring the Network with the Operation Panel
This section describes the basic procedures. Please make the settings appropriate
for the network you are using.	1
Important

❒These settings should be made by your systems administrator or after con- sulting with your systems administrator.

The following table shows the operation panel settings and their default set- tings. These are included in “TCP/IP Menu” of the ”Network“ menu.

❖Interface Settings/Network

Setting Name	Value
IP Address	011.022.033.044
Subnet Mask	000.000.000.000
Gateway Address	000.000.000.000
Access Control	000.000.000.000
Access Mask	000.000.000.000
Network Boot	None
NW Frame Type	Auto Select
Effective Protocol	TCP/IP	❍ *1
	NetWare	❍ *1
	NetBEUI	❍ *1
	AppleTalk	❍ *1
Ethernet Speed	Auto

*1 ❍ means that this protocol is active.

❖ File Transfer Settings

Setting Name	Value
Delivery Server IP Address	000.000.000.000
Fax RX File Transmission	Setting per Line	• Port 1: Do not Deliver.
		• Port 2: Do not Deliver.
		• Port 3: Do not Deliver.
	Print at Delivery	No
	Files to Deliver	All Files
	Delivery Failure File	—
Recall Interval Time	300 seconds
Number of Recalls	No

Note

❒The file transfer function requires the optional Hard Disk Unit.

13