Lanier 5622 AG manual Resuming the interrupted copying job, Copying and Multi-accessing, Reference

Copy Mode

D Press the {Interrupt} key again.

The machine resumes the printing job of the received fax document.

Resuming the interrupted copying job

A Reset the previous original. B Press the {Start} key.

The machine resumes the inter- rupted copy run.

Copying and Multi-accessing

If you want to make copy while using another function, follow the proce- dure below.

A Press the {Interrupt} key.

The interrupt display appears on the panel display.

B Place originals, and then press the {Start} key.

The machine interrupts the job that is printing and starts copying your originals.

C When copying is complete, re- move your originals and the cop- ies.

D Press the {Interrupt} key again.

The previous job settings will be restored and the machine will con- tinue from where it left off.

Note

❒Machine operations are different

depending on the“Print Priori- ty”settings (⇒ p.68 “General

Features 1/2”) or the “User Code Management” (⇒ p.68 “General Features 1/2”) settings.

Reference

⇒ p.35 “Multi-Access”

❖When “Print Priority” = “Fax”, “Printer”, or “Display” (default)

The machine completes the op- eration of the function set by

Print priority before performing
	2
the operation of another func-
tion.

Limitation

❒While the machine is per- forming two-sided printing in fax mode, you cannot make two-sided copies until the printing ends.

❖When “Print Priority” = “Inter- leave”

The machine performs the oper- ations in the order in which they are initiated. If another function is initiated during operation, the machine completes the cur- rent operation before perform- ing the operation of the function initiated.

27