Lanier 5627 AG, 5622 AG manual Configuring the Network, Preparation, Reference

Basics

Configuring the Network

	Configuring the Network
1

Preparation

To connect the machine to a network, you must first install the optional Net- work Interface Board Type 1027 and at least 64MB of memory in the machine.

Network Interface Board Type 1027 comes packaged with Printer Controller Type 1027 and Printer/Scanner Controller Type 1027.

Mode	Network Setting
Distribute received fax	IP Address, Subnet Mask, Gateway Address, Delivery Server IP
documents *1	Address,Fax RX File Transmission, Effective Protocol (TCP/IP)
Scanner (Network Twain	IP Address, Subnet Mask, Gateway Address, Effective Protocol
Scanner) *2	(TCP/IP)
Scanner (Network Deliv-	IP Address, Subnet Mask, Gateway Address, Effective Protocol
ery Scanner) *3	(TCP/IP), Delivery Server IP Address, Number of Recalls, Recall
	Interval time
Printer (TCP/IP) *4	IP Address, Subnet Mask, Gateway Address, Network Boot, Effec-
	tive Protocol
Printer (NetWare) *5	Effective Protocol, NW Frame Type

*1

*2

*3

*4

*5

To use this function, you'll need Scan Router V2 Lite (packaged with optional Print- er/Scanner Controller Type 1027 or Scan Router V2 Professional). In addition to the network settings, you must set the "Delivery Server IP Address" and "Fax RX File Transmission" for file transfer.

You will need to specify the settings for a network TWAIN scanner and network de- livery scanner when using the scanner function.

When you use this function, you need to have an optional network interface board and 64MB of memory, or Scan Router V2 Lite which bundled with the Printer/Scan- ner Controller Type 1027. If you need to have Scan Router V2 Professional, see the “Scanner Reference”.

Make the necessary settings for your network environment. For details about set- tings, see the “Printer Reference”.

Configure the TCP/IP when you use pure IP of NetWare 5/5.1.

This section describes the basic operation procedure. For more information about the settings, see p.68 “Settings You Can Change with the User Tools”.

For a network environment that uses TCP/IP, you can use SmartNetMonitor to configure IP addresses for Admin and the web browser packaged with Printer Controller Type 1027 or Printer/Scanner Controller Type 1027.

Reference

For details about SmartNetMonitor, see the "Network Printing Guide".

12