Lanier 5622 AG Interface Settings/Network 1/2-2/2, IP Address, Sub-net Mask, Gateway Address

Settings You Can Change with the User Tools

Interface Settings/Network 1/2—2/2

❖IP Address

Before using this machine with the network environment, you must config- ure the IP address.

Note

❒Default: 011.022.033.044

❒Do not use an IP address that has been used for another machine. To get the addresses, contact your network administrator.

❒Press the [←] or [→] key to move between each group of three numbers.

❒Press [Clear] if you enter the wrong number.

❖ Sub-net Mask 4

A number used to mathematically "mask" or hide an IP address on the net- work by eliminating those parts of the address that are alike for all the ma- chines on the network.

Note

❒Default: 000.000.000.000

❒Press the[←] or [→] key to move between each group of three numbers.

❒Press [Clear] if you enter the wrong number.

❖Gateway Address

A gateway is a connection or interchange point that connects two networks. Configure the gateway address for the router or host computer used as a gate- way.

Note

❒Default: 000.000.000.000

❒To get the address, contact your network administrator.

❖Access Control and Access Mask

You can control the client access. Access control and Access mask should be set together.

Note

❒Default: 000.000.000.000

❒If you do not want to set any limitation for this machine, use the default settings.

❒Press [Clear] if you enter the wrong number.

❒If you set access control as 192.168.15.16, clients addresses might be as- signed as follows:

79