Lanier 5622 AG manual General Features 2/2, Output Printer, Prepare Stapling, F/F4 Size Settings

Settings You Can Change with the User Tools

General Features 2/2

❖Output: Printer

You can specify a tray to which documents are delivered.

•Internal Tray 1

•Internal Tray 2

•Finisher Proof Tray

•Finisher Shift Tray

Note
❒ The output trays set on the Printer Driver have priority over the output
tray specified above.	4
❒ For details about output trays, refer to the illustration in p.70 “Output:

Copier”.

❖Prepare Stapling

Perform a test staple after replacing staples or removing jammed staples.

Note

❒Press [OK] to prepare stapling.

❖<F/F4> Size Settings

Currently three types of F size are available: 81/2"⋅13", 81/4"⋅13", and 8"⋅13". The document feeder or exposure glass sensor cannot distinguish these three types of originals. This function sets the F size for the document feeder or ex- posure glass sensor. Auto Paper Select or Auto Reduce/Enlarge can be used for F size originals based on this setting. You'll find it very convenient to use the machine with the F size setting.

Note

❒Default: 81/2"⋅13"

Output tray settings

Limitation

❒You cannot interrupt the current job with a job of a different function that specifies stapling or sorting.

❒You can interrupt the current job with an ordinary copy job or facsimile re- ception. The output tray used when the job is interrupted varies depending on the type of finisher shift tray and output tray specified for interruption.

71