Lanier 5622 AG, 5627 AG manual The paper sizes you can set for tray 2 are as follows, Reference

Settings You Can Change with the User Tools

❖The paper sizes you can set for tray 2 are as follows:

•A3L,B4L,A4K,A4L,B5K,B5L,A5L,A5K,B6L,A6L,C5L,C6L, DL EnvL

•11"⋅17"L,81/2"⋅14"L,81/2"⋅11"K,81/2"⋅11"L,51/2"⋅81/2"L,71/4"⋅101/2" L,71/4"⋅101/2"K,8"⋅13"L,81/2"⋅13"L,81/4"⋅13"L,41/8"⋅91/2"L,37/8"⋅

71/2"L, custom size (100-297 mm (3.9"-11.58") wide x 148-432 mm (5.77"- 16.8") long)

Reference

Copy Reference "Changing the Paper Size".

Important

❒If the specified paper size differs from the size of paper actually set in the paper tray, a paper misfeed might occur because the paper size is not de-

tected correctly. 4

Note

❒The tray fence for the optional large capacity tray (LCT) is fixed. If you need to change the paper size, contact your service representative.

❒If the paper size set for the dial in paper tray 1 and 2 is different to the pa- per size for this setting, the paper size of the dial has priority.

❒If you load paper in tray 1 or 2 that is not available on the paper size dial, set the dial to "*".

❒Default:

•Tray 1: LTK

•Tray 2: DLTL

•Tray 3:

For optional paper-feed table: LTL

For large capacity tray (LCT): LTL

•Tray 4: LGL

Specifying a custom paper size

To use paper of a custom size, follow the procedure below to specify the custom paper size.

A Click the [Custom Size] key on the "Tray Paper Size" display.

The "Custom Size" dialog box appears.

73