Cleaning and care
After cleaning, leave the filters to dry on an absorbent surface before replacing them.
When removing the filters for cleaning, also clean off any residues of oil or fat from the now accessible housing to prevent the risk of these catching fire.
Replace the grease filters, making sure that the locking clips are facing down towards the hob.
If a grease filter is inadvertently replaced upside down, insert a small screwdriver blade into the slit to disengage the clip.
Resetting the grease filter operating hours counter
After cleaning, the operating hours counter needs to be reset.
Whilst the fan is switched on, touch the Grease filter sensor for approx. 3 seconds until only the 1 sensor is flashing.
The Grease filter sensor will go out.
If you want to clean the grease filters before the operating hours counter has reached its maximum:
Touch the Grease filter sensor for approx. 6 seconds until only the 1 sensor is flashing.
28