Guide to the appliance
Extension piece
Tower
Canopy
Controls
Grease filters
Recirculation grille
(only for recirculation mode)
Hob lighting
Charcoal filter
(special accessory for recirculation mode)
Sensor for switching the fan on and off
Sensor for the hob lighting
Sensors for selecting the fan power level
Sensor for the run-on option
This sensor activates the
Sensor for the grease filters
The sensor lights up when the grease filters need to be cleaned.
It is used to reset the operating hours counter every time the grease filters are cleaned (see "Cleaning and care").
It can also be used to check and alter the operating hours counter.
Sensor for the charcoal filters
The sensor for the charcoal filter lights up when the charcoal filter used in recirculation mode needs to be replaced. For this to happen, the operating hours counter needs to be activated before the appliance is used for the first time.
The sensor is used to reset the operating hours counter every time the charcoal filters are replaced (see "Cleaning and care").
It can also be used to check and alter the operating hours counter.
For information about using the appliance, see "Operation".
15
