Activating the Conctivity 2.0 function
Installing the Conctivity 2.0 stick
The hob must be fitted with the Conctivity 2.0 stick so that the Conctivity 2.0 function can be used. This is supplied with this cooker hood.
Please refer to the installation instructions for the Conctivity 2.0 stick.
The radio connection between the hob and the cooker hood must be activated so that the Conctivity 2.0 function can be used.
Both appliances must be installed and operational.
You only need to carry out the activation procedure once.
If the appliances are disconnected from the electricity supply, during a power cut for example, they will still remain activated.
Important. To establish the radio connection, the cooker hood and hob are activated at the same time. Start activating the cooker hood first, then the hob.
Activating the Conctivity 2.0 function on the cooker hood
Switch off the fan, hob lighting and hob.
Touch the
Touch in turn
–the 1 sensor,
–then the IS sensor,
–then the lighting sensor .
If Conctivity 2.0 is not activated, 2 and 3 will flash at the same time.
40