Miele 09 730 840 Activating the Conctivity 2.0 function on the hob, Checking activation

Activating the Con￿ctivity 2.0 function

￿Touch the IS sensor to activate Con￿ctivity 2.0.

While it is searching for the radio connection, the 2 sensor will light up and 3 will flash.

￿Meanwhile you can start the activation process for the hob.

Activating the Con￿ctivity 2.0 function on the hob

￿While the cooker hood is searching for the radio connection, start the activation process for the hob.

For further information please refer to the operating instructions for the hob.

The radio connection is established when sensors 2 and 3 on the cooker hood are constantly lit up.

￿Confirm activation of the cooker hood by touching the Run-on option sensor ￿. All the indicator lights will go out.

￿Confirm activation of the hob.

The Con￿ctivity 2.0 function is now ready for use.

The function will not be activated unless it is confirmed within 4 minutes.

Checking activation

To check whether the Con￿ctivity 2.0 function is activated on the cooker hood:

￿Switch off the fan and the hob lighting.

￿Touch the Run-on sensor ￿ for approx. 10 seconds until the 1 sensor lights up.

￿Press in turn

–the 1 sensor,

–then the IS sensor,

–then the lighting sensor ￿.

If the Con￿ctivity 2.0 function is activated, 2 and 3 will light up constantly.

If the Con￿ctivity 2.0 function is not activated, 2 and 3 will flash at the same time.

￿Touch the Run-on sensor ￿ to exit the check. All the indicator lights will go out.

￿To check whether the hob is activated, please refer to the operating instructions for the hob.

If communication cannot be established even although the cooker hood and the hob have been activated, both appliances must be deactivated and then activated again.

41