Operation (Automatic and manual modes)
One or more of sensors 1 to IS will flash.
The number of flashing sensors indicates the percentage of the operating time which has already been used up.
Sensor 1 . . . . . . . . . . . . . . . . . . . . 25 % Sensor 1 and 2 . . . . . . . . . . . . . . . 50 % Sensor 1 to 3 . . . . . . . . . . . . . . . . . 75 % Sensor 1 to IS . . . . . . . . . . . . . . . 100 %
When you take your finger off the Grease filter sensor , the current fan setting will show.
The number of operating hours used remains in the memory, even when the cooker hood is switched off or there is a power cut.
Charcoal filter operating hours counter
(only for recirculation mode)
On delivery, the operating hours counter for the charcoal filter is deactivated.
For recirculation mode, the operating hours counter needs to be set to suit the type of cooking you do.
The Charcoal filter sensor will light up after the cooker hood has operated for the number of hours set.
The charcoal filter must then be replaced with a new one.
Afterwards, the operating hours counter will need to be reset (see "Cleaning and care").
Activating and altering the charcoal filter operating hours counter
Touch the On/Off sensor to switch the fan off.
Touch the
The Grease filter sensor and one of the fan power level sensors 1 to IS will flash.
Sensors 1 to IS indicate the time set: Sensor 1 . . . . . . . . . . . . . . . . 120 hours Sensor 2 . . . . . . . . . . . . . . . . 180 hours Sensor 3 . . . . . . . . . . . . . . . . 240 hours Sensor IS . . . . . . . . . . . . . Deactivated
Touch the relevant number to select the time you want.
Confirm the selection by touching the Charcoal filter sensor .
All the indicator lights will go out.
If you do not confirm within 4 minutes, the cooker hood will automatically revert to the original setting.
24
