TROUBLESHOOTING

If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist.

Problem

No power

Solution

-Check if the AC cord is properly connected.

-Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again.

No sound or picture

-

Check if the connected TV is turned on.

 

- Check if the connections are made securely and correctly.

 

- Check whether the connected TV or other device supports HDCP. (This unit will not

 

 

output a video signal unless the other device supports HDCP.)

 

- Check whether the output format of this unit (HDMI FORMAT) matches the

 

 

supported input format of other connected device.

 

- Set “HDMI Video Resolution” setting other than “Auto” or “1080p24”.

Distorted picture

-

Sometimes a small amount of picture distortion may appear.

 

 

This is not a malfunction.

 

- Connect this unit directly to the TV. If the RCA audio / video cables are connected to

 

 

a VCR, pictures may be distorted due to the copy right protection system.

Completely distorted picture or

-

Make sure the disc is compatible with this unit.

black / white picture with BD / DVD

 

 

No sound or distorted sound

-

Adjust the volume.

 

- Check that the speakers are connected correctly.

 

- Check the HDMI connections.

 

- Check the settings in “Audio” menu.

 

 

 

Picture freezes momentarily

-

Check the disc for fingerprints / scratches and clean with a soft cloth wiping from

during playback

 

center to edge.

 

-

Clean the disc.

Disc cannot be played back

-

Clean the disc.

 

- Ensure the disc label is facing up.

 

- Check if the disc is defective by trying another disc.

 

- Cancel the ratings control or change the control level.

 

- Insert a correct disc that can be played back on this unit.

SD Memory Card cannot be read.

-

The format of the card does not match to this unit or the card is not compatible.

No return to start-up screen when

-

Reset this unit by turning it off, then on again.

disc is removed

 

 

The unit does not respond to the

-

Aim the remote control directly at infrared sensor window on the front panel.

remote control

-

Reduce the distance to infrared sensor window.

 

- Replace the batteries in the remote control.

 

- Re-insert the batteries with their polarities (+ / - signs) as indicated.

Buttons do not work or the unit

-

To completely reset the unit, unplug the AC cord from the AC outlet for 5-10

stops responding

 

seconds.

The unit does not respond to

-

Operations may not be permitted by the disc.

some operating commands

 

Refer to the instructions of the disc.

during playback

 

 

The unit cannot read BD / DVD /

-

Condensation? (Let sit 1 or 2 hours)

CD

-

You are attempting to playback a disc other than one with one of the marks on page

 

 

17.

 

- Wipe the dirt off the disc or replace the disc.

Angle does not switch

-

The angle cannot be switched for BD / DVD which do not contain multiple angles.

 

 

In some cases multiple angles are only recorded for specific scenes.

Playback does not start when the

-

Check the settings in “Parental” menu.

title is selected

 

 

The password for rating level has

-

Enter the default password “4737”, then your forgotten password will be cleared.

been forgotten

 

 

Note

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for details on correct operations.

Some functions are prohibited on some discs.

EN

43

Page 43
Image 43
Onkyo DV-BD606 instruction manual Troubleshooting, Problem, Solution