FUNCTIONAL OVERVIEW
Front Panel
1 2 | 3 | 4* | 5 | 6 | 7 | 8* 9 10 |
ON/STANDBY
SD CARD
*The unit can also be turned on by pressing these buttons.
1.STANDBY indicator
•This indicator lights up in red in standby mode and turns off when the power is on.
2.yON / STANDBY button
•Press to turn the unit on or off.
3.Disc tray
•Place a disc when opening the disc tray.
4.A (open / close) button*
•Press to open or close the disc tray.
5.Display
•Refer to “Front Panel Display” on page 11.
6.k (pause) button
•Press to pause playback.
7.C (stop) button
•Press to stop playback.
8.B (play) button*
•Press to start or resume playback.
9.Infrared sensor window
•Receive signals from your remote control so that you can control the unit from a distance.
10.SD CARD slot
•Insert an SD Memory Card, and play back the contents in it.
Rear Panel
1 | 2 | 3 |
| 4 | 5 |
VIDEO OUTPUT | AUDIO OUTPUT |
| |||
COMPONENT | ANALOG | DIGITAL |
| ||
Y | PR | L | (PCM//BITSTREAM) |
| |
|
|
| COAXIAL | OPTICAL |
|
| OUT |
|
|
|
|
| HDMI |
|
|
|
|
VIDEO | PB | R |
|
|
|
|
|
|
|
| AC INLET |
6 |
|
|
|
|
|
1.VIDEO OUTPUT (COMPONENT) jacks
•Use to connect a TV with component video inputs with an RCA component video cable.
2.HDMI OUT jack
•Use to connect a TV with an HDMI compatible port with an HDMI cable.
3.AUDIO OUTPUT (ANALOG L / R) jacks
•Use to connect a TV, an AV receiver / amplifier or other device with an RCA audio cable.
4.AUDIO OUTPUT (DIGITAL COAXIAL / OPTICAL) jacks
•Use to connect an AV receiver / amplifier, Dolby Digital / DTS decoder or other device with a digital audio coaxial / optical input jack with a digital audio coaxial / optical cable.
5.AC INLET Terminal
•Use to connect the AC outlet with the AC cord.
6.VIDEO OUTPUT (VIDEO) jack
•Use to connect a TV, an AV receiver or other device with an RCA video cable.
Note
•Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
•This unit does not have the RF modulator.
8 | EN |
