Installation
3 protective sheets
for use when fitting the tower.
1 exhaust socket for exhaust ducting 150 mm.
1 reducing collar
for exhaust ducting 125 mm.
1 non-return valve
for fitting into the exhaust connection on the motor unit (not for recirculation mode)
Telescopic wall bracket for securing the cooker hood to the wall.
Con@ctivity 2.0 stick
for
Conversion kit for recirculation mode
contains directional unit and flexible aluminium ducting with clips (this kit has to be purchased as an optional extra - see Technical Data).
6 screws 5 x 60 mm and
6 x plugs 8 x 50 mm
for securing the wall bracket.
The screws and plugs are designed for use in solid walls only. For other types of wall construction, alternative fixings will be required. Make sure that the wall is able to take the weight of the cooker hood.
2 x M 6 self-tapping nuts
for securing the appliance.
2 screws 3.9 x 7.5 mm for securing the tower.
1 lever
for dismantling the tower.
Installation instructions
35