Panasonic PT-FW300E Installation, High Altitude Mode, Emulate, Function Button, Audio Setting

PROJECTOR SETUP menu

INSTALLATION

When installing the projector, select the projection method according to the projector position. Press I H to cycle through the options. See “Projection method” on page 18.

FRONT/DESK	Setting on a desk/floor and
	projecting from front
FRONT/CEILING	Mounting on the ceiling and
	projecting from front
REAR/DESK	Setting on a desk/floor and
	projecting from rear
REAR/CEILING	Mounting on the ceiling and
	projecting from rear

HIGH ALTITUDE MODE

If you use the projector at high elevation, the HIGH ALTITUDE MODE setting needs to be ON to set the fan speed high. Press I H to select the required option.

OFF	The fan speed is low.
ON	The fan speed is high.

NOTE:

•At 1 400 m (4 593 ft) above sea level, the setting must be ON.

•The loudness of fan noise depends on the HIGH ALTITUDE MODE setting.

EMULATE

You can switch to the Panasonic past model's control commands for COMPUTER connection.

Settings	DEFAULT	F100, FW100, F200, F300,
		FW300 models
	D3500	D3500 models
	D4000	D4000 models
	D/W5K series	D5500, DW5000, D5600,
		DW5100, D5700 models
	L730	L520, L720 models
	L780	L750, L780 models
	L735	L735 models
	L785	L785 models
	LB/W80	LB75, LB80, LW80 models

FUNCTION BUTTON

You can assign a certain menu function to the FUNCTION button as shortcut. Press I H to select the required menu option, and the ENTER button.

Options	Functions	Refer
DISABLE	Deactivate the FUNCTION	-
	button.
ASPECT	Display the ASPECT menu.	38
PICTURE MODE	Display the PICTURE MODE	35
	menu.
DAYLIGHT VIEW	Display the DAYLIGHT VIEW	36
	menu.

NOTE:

•Without any operation for 5 seconds, the displayed menu will be disappeared.

AUDIO SETTING

VOLUME

You can adjust the volume of the built-in monaural speaker and VARIABLE AUDIO OUT terminal.

IDecrease

H Increase

BALANCE

You can adjust to hear the sound played equally through both right and left from VARIABLE AUDIO OUT, or shift the balance so more sound plays through the left or right side.

IMore sound plays through the left side

HMore sound plays through the right side

IN STANDBY MODE

You can switch on/off the sound output in standby mode.

OFF	No sound in standby mode.
ON	Output audio in standby mode.

AUDIO IN SELECT

You can switch the audio output method for COMPUTER1 IN, COMPUTER2 IN and DVI-D IN terminals.

DVI

COM.AUDIO IN 2

Output audio that is input to the

COMPUTER AUDIO 2.

AUDIO IN Output audio that is input to the

AUDIO IN.

COMPUTER1

COM.AUDIO IN 1

Output audio that is input to the

COMPUTER AUDIO 1.

AUDIO IN Output audio that is input to the

AUDIO IN.

ENGLISH - 44