| PROJECTOR SETUP menu | ||
|
|
| |
COMPUTER2 |
|
| |
FILTER COUNTER RESET |
| ||
COM.AUDIO IN 2 |
| ||
Output audio that is input to the | After you replaced the Auto Cleaning Filter (ACF), | ||
COMPUTER AUDIO 2. | |||
REMAINING FILTER of STATUS in PROJECTOR | |||
AUDIO IN Output audio that is input to the | |||
SETUP need to be reset to "0". | |||
AUDIO IN. | |||
1. Press the ENTER button for more than 3 seconds. | |||
| |||
TEST PATTERN
You can use the 7 different test patterns to adjust the focus of the image. See “Lens shift and positioning” on page 19.
1.Press the ENTER button to display the test pattern 1.
2.Press I H to select the required test pattern.
3.Adjust the focus with the focus lever.
4.Press the MENU or RETURN button to return to the previous menu, or press repeatedly to escape from the menu mode.
The confirmation screen will be displayed.
2.Select OK by pressing I, then press the ENTER button.
3.Display the STATUS and confirm the figure.
NOTE:
•When the projector and/or the screen is tilted, adjust the focus at the centre of the image. The upper and lower edge might be out of focus.
•When the image is distorted in keystone, adjust the KEYSTONE in POSITION menu.
INITIALIZE ALL
You can reset all of the customised settings to the factory defaults except NETWORK, RUNTIME and REMAINING FILTER of STATUS in PROJECTOR SETUP menu.
1.Press the ENTER button.
2.Select OK by pressing I, then press the ENTER button.
3.Turn off the power by pressing the power button.
4.Switch off the MAIN POWER button to reset the projector.
5.Switch on the MAIN POWER button.
6.Press the power button.
7.The minimum required setting screen will be displayed.
See “Minimum required setting screen” on page 13.
NOTE:
•The security system is deactivated by default and when initialised.
•When the projector is initialised, it will be reset to the factory default password operation.
