Switching the projector on/off
Switching on the projector
1. | Switch the MAIN POWER on. | 3. Press the power button. |
| The power indicator lights up in red. | The power indicator lights up in green after flashing |
2. | Open the front panel cover. | for a while. |
| This is not necessary in remote control operation. | The STARTUP LOGO will be displayed on the |
|
| screen. See “STARTUP LOGO” on page 41. |
NOTE:
•When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for the characteristics of the lamp. Those are normal and will not affect the performance of the projector.
•When the internal cooling fan is operating, some operational sound may be heard. The loudness of the operational sound depends on the external temperature.
•If you disconnected the mains lead or switched off the MAIN POWER while on projecting mode, the projection will start with connecting the mains lead or switching on the MAIN POWER. See “INITIAL START UP” on page 43.
Switching off the projector
Basic Operation
1. Open the front panel cover.
This is not necessary in remote control operation.
2. Press the power button.
The confirmation screen is displayed. It will disappear and return to the projection after 10 seconds without any operation.
To return to the projection, press any button except the power button.
3. Press the power button.
The power indicator lights up in orange while cooling the lamp, then illuminates red when is ready to switch off the MAIN POWER.
4.Switch off the MAIN POWER on the back of the projector.
NOTE:
•You can disconnect the mains lead or switch off the MAIN POWER instead of following this procedure. See “INITIAL START UP” on page 43.
