Remote control operation
Switching the input signal
You can switch the input method manually by pressing the COMPUTER, NETWORK and VIDEO buttons. Press the required button several times or I H to cycle through the input methods as follows. The actual projected image will be changed in a while.
The graphical guidance will be displayed on the upper right of the projected image and you can confirm the selected input method which is highlighted in yellow. See “INPUT GUIDE” on page 40.
NOTE:
•If you select an unplugged input method, the guidance will blink on and off several times.
•See “List of compatible signals” on page 54.
•See “Connections” on page 21.
Pressing the COMPUTER button
COMPUTER1 | H | COMPUTER2 | ||
F |
| G | ||
|
|
|
|
|
|
| DVI |
|
|
NOTE:
•Only when the COMPUTER2 SELECT is set to INPUT, the COMPUTER2 is selectable.
Pressing the NETWORK button
Only for the network connection operation. See CD- ROM contents for more detailed information.
Pressing the VIDEO button
VIDEO | IH |
Pressing the INPUT SELECT button on the projector
Basic Operation
COMPUTER1 | H | COMPUTER2 |
F |
| G |
|
|
|
DVI |
| |
|
|
|
F |
| G |
|
|
|
NETWORK | I | VIDEO |
Enlarging the centred area
You can enlarge the projected image down to a centred area for emphasizing within the range of 1x to 2x.
Enlarging the image | Shifting the centre point |
1. Press the DIGITAL ZOOM +/- button once. | Press F G I H to shift the centre point. |
The centred area of the image will then be enlarged to 1.5x.
2.Adjust the image size by pressing the DIGITAL ZOOM +/- button.
The image size will be changed in steps of 0.1.
NOTE:
•When the COMPUTER signal is projected, the enlargement range will be changed to 1x to 3x. When the FRAME LOCK in POSITION menu is set to ON, the enlargement range is 1x to 2x. See “FRAME LOCK” on page 39.
•When the input signal is changed while the DIGITAL ZOOM is activated, the DIGITAL ZOOM will be cancelled.
•While DIGITAL ZOOM is activated, FREEZE is not available.
