Switching the projector on/off

Mains lead

Connecting

Disconnecting

1.Make sure the shape of the mains plug and the AC IN terminal on the back of the projector match, then push the plug all the way in.

1.Unplug the mains lead from the mains socket.

2.Depress the latch and slide the cover off.

2.Align the side of the power cord secure lock with the side guide rail of the AC IN terminal of the projector and slide it in.

Rail guide

3.Place the latch to the latch catcher and press until it clicks.

Latch

4. Connect the mains lead to a mains socket.

Latch

3.Slide the power cord secure lock up along the side guide rail and remove.

Rail guide

4.Hold the plug and unplug the mains lead from the AC IN terminal on the back of the projector.

Power indicator lights in orange if the internal cooling fan is still operating by internal power supply.

Basic Operation

NOTE:

Do not use other than the provided mains lead.

Ensure all the input devices are connected and turned off before connecting the mains lead.

Do not force the connector as this may damage the projector and/or the mains lead.

Dirt or dust build-up around plugs may cause fire or electrical hazards.

Switch off the power to the projector when not in use.

If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.

Direct power on function

You can start the projection with only supplying the electric power. See “INITIAL START UP” on page 43.

Direct power off function

You can switch off the electric power supply any time by unplugging the mains plug from the mains socket or by switching off the main power. The internal lamp cooling fan keeps operating by the internal power supply, and stops automatically when cooled enough.

ENGLISH - 23

Page 23
Image 23
Panasonic PT-FW300NTE, PT-FW300E manual Switching the projector on/off, Mains lead, Connecting, Direct power on function