Remote control operation
Capturing an image
Press the FREEZE button to capture the image and stop the audio, and you can see it as a still picture while the AV equipment are continuing.
Press the FREEZE button again to escape and return to the continuing image.
Stopping the projection
You can stop the projection and audio sound | power. Press the AV MUTE button again to escape. |
through the projector for saving electrical |
|
Resetting to the factory default settings
You can reset most of the customised settings |
| |
to the factory defaults by pressing the | NOTE: | |
DEFAULT button of the remote control. Display | • Some menu items are not available to reset by pressing | |
the required sub menu or the menu items, and | the DEFAULT button. Adjust each menu items | |
press the DEFAULT button again. | manually. | |
See “Main menu and | • To reset all the settings to the factory defaults, see | |
“INITIAL START UP” on page 43. | ||
| ||
|
|
Projecting an image in INDEX-WINDOW mode
You can project an image in split 2 windows as an
Operation
To escape from the
Projected image | Frozen image |
| |
|
|
|
|
|
|
|
|
|
|
|
|
Continuing image
Switching the position
Changing the image size
Press F G to capture a new image and change the size in 2 ways.
Continuing image
Frozen image
Basic
In default, the frozen image is displayed on the left and the subsequent image is displayed on the right. Press I H to switch the position.
Frozen image | Continuing image |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Continuing image | Frozen image |
NOTE:
•If you change the window size, the aspect ratio of the image is changed and becomes vertically elongated.
•When vertically enlarged, some signals image with THROUGH aspect ratio setting will not be displayed correctly.
Capturing a new image
While in
NOTE:
•When capturing a quick moving picture, perform several times to get a stabled image.
