Extron electronic MVX 128 Example 7 Recalling a preset, Press and release the Preset button figure

Example 7: Recalling a preset

The following steps show an example in which a preset is recalled to become the current configuration. The steps show the front panel indications that result from your actions.

1. Press and release the Esc button (figure 3-37).

Press the Esc button to clear all selections.

CONTROL

1

ENTER PRESET VIEW ESC

1= Blink once The LED blinks once.

Figure 3-37 — Clear all selections

2.	Press and release the Preset button (figure 3-38).
						All input and output LEDs
						with assigned presets light.
					Lit				Unlit
			(Preset Assigned) (Preset Unassigned)
		Press and release the Preset button.
		The Preset LED lights.
	PRESET		1				2	3		4
				Preset 13			Preset 14	Preset 15		Preset 16
Figure 3-38 — Enter Recall Preset mode
3.	Press and release the Output 1 button (figure 3-39).

Press and release the Output 1 button.

The LED blinks to indicate that this preset number is selected but not recalled.

1	2	3
1	2	3	4
Preset 13	Preset 14	Preset 15	Preset 16

= Blinking LED

CONTROL

ENTER PRESET

The Enter LED blinks to indicate the need to recall the preset. The Preset LED remains lit.

Figure 3-39 — Select the preset

MVX 128 A VGA Matrix Switchers • Operation 3-23