Extron electronic MVX 128 manual

Example 1: Creating a set of video and audio ties

In the following example, input 5 is tied to outputs 3, 4, and 8. The steps show the front panel indications that result from your actions.

NThis example assumes that there are no ties in the current configuration.

1. Press and release the Esc button (figure 3-3).

Press the Esc button to clear all selections.

CONTROL

1

ENTER PRESET VIEW ESC

1= Blink once The LED blinks once.

Figure 3-3 — Clear all selections

2. To select video and audio for the tie, if necessary, press and release the RGBHV button and the Audio button until the LEDs light (figure 3-4).

I/O

RGBHV AUDIO

Press the RGBHV button to toggle on and off.

The LED lights when selected.

Press the Audio button to toggle on and off.

The LED lights when selected.

Figure 3-4 — Select RGBHV and audio

3. Press and release the input 5 button (figure 3-5).

Press and release the Input 5 button.

3 4 5

INPUTS 6

The LED lights.

Figure 3-5 — Select an input

MVX 128 A VGA Matrix Switchers • Operation 3-9