Extron electronic MVX 128 manual Example 3 Removing a tie from a set of video and audio ties

Example 3: Removing a tie from a set of video and audio ties

In the following example, an existing audio tie is removed from the current configuration. The steps show the front panel indications that result from your action.

NThis example assumes that you have performed example 1 and example 2.

1. Press and release the Esc button (figure 3-15).

Press the Esc button to clear all selections.

CONTROL

1

ENTER PRESET VIEW ESC

1= Blink once The LED blinks once.

Figure 3-15 — Clear all selections

2. To select audio only for the tie, if necessary, press and release the RGBHV button and/or Audio button (figure 3-16).

I/O

RGBHV AUDIO

Press the RGBHV button to toggle on and off.

The LED is unlit when deselected.

Press the Audio button to toggle on and off.

The LED lights when selected.

Figure 3-16 — Select audio only

3. Press and release the Input 5 button (figure 3-17).

Press and release the Input 5 button.

The LED lights.

				INPUTS
3	4	5	6

The Output 3, Output 4, and Output 8 LEDs light to indicate the audio ties created in example 1.

The Output 1 LED does not light to indicate the tie created in example 2 because that tie is RGBHV only.

1 2 3 4 5 6 7 8

OUTPUTS

Figure 3-17 — Select an input

MVX 128 A VGA Matrix Switchers • Operation 3-13