Extron electronic MVX 128 manual

Example 2: Adding a tie to a set of video and audio ties

In the following example, a new video tie is added to the current configuration. The steps show the front panel indications that result from your action.

NThis example assumes that you have performed example 1.

1. Press and release the Esc button (figure 3-9).

Press the Esc button to clear all selections.

CONTROL

1

ENTER PRESET VIEW ESC

1= Blink once The LED blinks once.

Figure 3-9 — Clear all selections

2. To select video only for the tie, if necessary, press and release the RGBHV button and/or Audio button (figure 3-10).

I/O

RGBHV AUDIO

Press the RGBHV button to toggle on and off.

The LED lights when selected.

Press the Audio button to toggle on and off.

The LED is unlit when deselected.

Figure 3-10 — Select RGBHV only

3. Press and release the Input 5 button (figure 3-11).

Press and release the Input 5 button.

The LED lights.

				INPUTS
3	4	5	6

The Output 3, Output 4, and Output 8 LEDs light to indicate the RGBHV ties created in example 1.

		1		2		3	4		5	6	7	8
								OUTPUTS
Figure 3-11 — Select an input
4. Press and release the Output 1 button (figure 3-12).
Press and release the Output 1 button.
The LED blinks to indicate that the selected
RGBHV input will be tied to this output.
									ENTER
									The Enter LED blinks to indicate
1	2	3		4		5	6
									the need to confirm the change.
					OUTPUTS
Figure 3-12 — Select the output
			MVX 128 A VGA Matrix Switchers • Operation									3-11