Extron electronic MVX 128 manual Ezg

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description
Resets

Reset global presets and names	EZG}	Zpg]
Reset one global preset	EX(ZG}	ZpgX(]
Reset audio input levels	EZA}	Zpa]
Rest audio output levels	EZV}	Zpv]
Reset all mutes	EZZ}	Zpz]
Reset flash	EZFFF}	Zpf]
Reset whole switcher	EZXXX}	Zpx]
Absolute reset	EZQQQ}	Zpq]

Clear all global presets and their names.

Clear global preset X(. Rest all audio input levels (gain and attenuation) to 0 dB. Reset all audio output levels (volume) to 100% (no attenuation).

Reset all video and audio mutes.

Reset flash memory (erase all user-supplied files).

Clear all ties and presets, reset all audio gains to 0 dB, and reset volume to 100%. Similar to Reset whole switcher, plus clear the IP address to 192.168.254.254 and subnet mask to 255.255.000.000.

View ties, gain, volume, mutes, and presets

View RGBHV output tie	X#&	X@]
Example:	5&	12]
View video output tie	X#%	X@]
Example:	7%	02]
View audio output tie	X#$	X@]
Example:	3$	06]
View input gain	X@G	X$]
Example:	4G	-02]
View output volume	X@V	X&]
Example:	7V	55]
View output mutes	EVM}	X1)1, X1)2, ... X1)8Mut]
Example:	EVM}	02301000Mut]

Input 12 RGBHV is tied to output 5.

Input 2 video is tied to output 7.

Input 6 audio is tied to output 3.

Gain for input 4 is -2 dB.

Volume for output 7 is 55%.

Each X1) response is the mute status of an output, starting from output 1.

Output 2 audio is muted, output 3 video and audio are muted, and output 5 video is muted. All other outputs are unmuted.

MVX 128 A VGA Matrix Switchers • Programmer’s Guide 4-9