X1X1X1X1X1X2, Information requests | Extron electronic MVX 128

Upload date and time

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description
Information requests
Information request	I	V12X08•A12X08]
Request part number	N	60-799-01]

NThere are two separate sets of Extron ﬁrmware that the switcher can report on: the controller ﬁrmware, which is the overall control ﬁrmware; and the latest optional Extron ﬁrmware update, which is available at www.Extron.com.

Query controller ﬁrmware	Q	X1!]
version
Example:	Q	1.23]	The factory-installed
			controller ﬁrmware version
			is 1.23 (sample value only).
Query controller ﬁrmware	0Q	X1!-X1@-X1@]	Provide a detailed status
version (verbose)			of the MVX 128 controller
			ﬁrmware and any ﬁrmware
			upgrade. The ﬁrmware that
			is running is marked by
			an asterisk (*). A caret (^)
			indicates that the ﬁrmware
			has a bad checksum or an
			invalid load. ?.?? indicates
			that ﬁrmware is not loaded.

Response description: Example:

Description

Controller ﬁrmware version-updated ﬁrmware version] 0q

* indicates the version running

Response: n.nn-1.00(1.06-16x16 Series -Wed, 22 Feb 2006 00:00:00 GMT)-1.00*(1.06-16x16 Series -Thu, 16 Mar 2006 16:39:21 GMT)

Meaningless data	MVX 128 firmware version	Updated firmware version
for this switcher model


Request system status	S			X1(•X1(•X1(•X1(•X1(•X2)]
Response description:	+3.3V•+5V•-5V•+15V•-15V•temperature (degrees fahrenheit)]
Example:				-15V power system at -15.15V

	3.29•5.04•-5.14•15.27•-15.15•120.20
	3.3V power system		at 3.29V
	3.3V power system		at 3.29V	Temperature 120.20 degrees

MVX 128 A VGA Matrix Switchers • Programmer’s Guide 4-11

Image 69

Extron electronic MVX 128 manual X1X1X1X1X1X2, Information requests

Contents

MVX 128 a VGA Matrix Switcher Safety Instructions English PrecautionsConsignes de Sécurité Français Sicherheitsanleitungen Deutsch Quick Start MVX 128 a VGA Matrix Switchers Plug the switcher into a grounded AC sourceMVX 128 a VGA Matrix Switchers Quick Start QS-1 Viewing and adjusting the audio level Saving or recalling a presetQS-2 MVX 128 a VGA Matrix Switchers Quick Start Create a tie Table of Contents Table of Contents, cont’d One MVX 128 a VGA Matrix Switchers Introduction About the MVX 128 a Matrix SwitcherIntroduction About this Manual Deﬁnitions Introduction, cont’d Features MVX 128 a VGA Matrix Switchers Introduction Introduction, cont’d Two Mounting the Switcher InstallationMVX 128 a VGA Matrix Switchers Installation Cabling and Rear Panel Views Audio connections Captive screw connector wiring for audio inputs RS-232/RS-422 connection Installation, cont’d Power connection Reset button Installation, cont’d Three MVX 128 a VGA Matrix Switchers Operation Front Panel Controls and IndicatorsOperation Deﬁnitions Sample label Input and output buttons Control buttons Operation, cont’d See Viewing and adjusting the input audio level on Controls Front Panel Operations Power Creating a conﬁguration Example 1 Creating a set of video and audio ties Press and release the Esc button ﬁgurePress and release the input 5 button ﬁgure Press and release the Enter button ﬁgure Select the outputs This example assumes that you have performed example Example 2 Adding a tie to a set of video and audio ties 13 Press the Enter button 15 Clear all selections Example 3 Removing a tie from a set of video and audio ties 18 Deselect the output 21 Clear all selections Viewing a conﬁguration 22 Select Rgbhv or video and audio Rgbhv button and the Audio button ﬁgure Video Audio Press and release the Rgbhv button to deselect Rgbhv ﬁgure Example 5 Muting and unmuting an output Muting and unmuting video and/or audio 28 Select Rgbhv and audio 30 Unmute the outputs Example 6 Saving a preset Using global presets Press and release the Output 1 button ﬁgure LED blinks ﬁgure Press and release the Preset button ﬁgure Example 7 Recalling a preset 40 Press the Enter button Viewing and adjusting the input audio level When blinking quickly, and 3 dB DB when blinking slowly, 2 dBWhen lit. See the table at right Press and release an input button 42 Clear all selections Example 10 Viewing and adjusting an input audio level View View ESC Outputs Press and release the Audio button ﬁgure Viewing and adjusting the output volume Released or the upper or lower limit is reachedAudio mode. The Audio button stops blinking Audio output volume settings Reading the displayed volume 47 Clear all selections Example 11 Viewing and adjusting an output volume level 49 Select output Performing a system reset from the front panel Locking out the front panel Executive mode Selecting the RS-232/RS-422 protocol and baud rate Enter Preset View ESC Rgbhv Audio Performing an absolute system reset from the rear panel Rear Panel OperationsNot occur within 1 second Optimizing the Audio Performing a hard reset from the rear panel Troubleshooting Conﬁguration WorksheetsWorksheet example 1 System equipment Audio Worksheet example 2 Daily conﬁguration 61 Worksheet example 3 Test conﬁguration Worksheet example 3 Test conﬁguration Conﬁguration worksheet Output destinations Operation, cont’d Four Switcher-Initiated Messages Host-to-Switcher InstructionsMVX 128 a VGA Matrix Switchers Programmer’s Guide Programmer’s Guide Using the Command/Response Tables Switcher Error Responses Symbol deﬁnitions Command/Response Table for SIS CommandsX1 = X1@ = Description Command Ascii command Response Additional % G InX! AudX$ Audio volume adjustment settings EX!NI EZG X1* CY Information requests X1X1X1X1X1X2 Programmer’s Guide, cont’d Five Installing the software Matrix Switchers Control ProgramMVX 128 a VGA Matrix Switchers Matrix Software Matrix Software Click OK and proceed to step Using the software Matrix Software, cont’d Open ﬁle window Updating ﬁrmware Click the Exit button to exit the ﬁrmware loader utility Windows buttons, drop boxes, and trashcan Windows menusFile menu Tools menu Audio-Output volume settings Displays the audio Ties shown as lines Preferences menu Using the help system Using emulation modeMaster-Reset selection Button-Label Generator Program AppendixAA Speciﬁcations Speciﬁcations, Part Numbers, Accessories Audio Speciﬁcations, Part Numbers, Accessories, cont’d Accessories Part Numbers and AccessoriesIncluded parts Replacement part Number Adapters, power supplies, labels Part number Male-to-female VGA backshell connector cables Part number Male-to-female VGA molded connector cables Part numberMale-to-male VGA molded connector cables Part number Cables Figure A-1 Button label blanks, 12-button strips Button Labels Speciﬁcations, Part Numbers, Accessories, cont’d Extron Electronics, Europe FCC Class a Notice Extron’s Warranty Extron Electronics, USA