Extron electronic MVX 128 manual

= Blinking LED

Operation, cont’d

5. Press and hold the Output 3 button and the Output 4 button (figure 3-30) for approximately 2 seconds until the LEDs light steadily. The output 3 and output 4 video and audio signals are unmuted.

Press and hold the Output 3 and Output 4 button.

3

4 5 OUTPUTS

2 seconds

3 4 5 OUTPUTS

The LEDs stop blinking and light to indicate that the

RGBHV and audio outputs are unmuted.

Release the button.

Figure 3-30 — Unmute the outputs

NIf both RGBHV and audio are selected, the unmute action toggles both the video and audio outputs. If either the video output or the audio output is already unmuted, the muted output is unmuted and the unmuted output is muted.

6. Press and release the View button to exit View-Onlymode (figure 3-31).

Press the View button to exit View-Onlymode.

CONTROL

The View LED returns to the unlit state.

All input LEDs and output

SET VIEW LEDs return to the unlit state.

Figure 3-31 — Press the View button to exit View-Onlymode

3-20 MVX 128 A VGA Matrix Switchers • Operation