DB when blinking slowly, 2 dB | Extron electronic MVX 128

3.	Press and release an input button
	to select an input. The output
	LEDs display the audio level for
	the selected input and the Esc (>)
	and View (<) LED display the
	polarity (gain [+] or attenuation
	[–]). Each output LED indicates
	1 dB when blinking slowly, 2 dB
	when blinking quickly, and 3 dB
	when lit. See the table at right.
4.	Press and release the Esc (>) and
	View (<) buttons to increase and
	decrease the audio level by 1
	dB per each push of the button,
	or press and hold the button to
	change the level at a rate of 3 dB
	per second until the button is
	released or the upper or lower
	limit is reached.
5.	Press and release the Audio button
	to exit the Audio mode. The Audio
	LED stops blinking.

N• Pressing the Enter or Preset button also exits Audio mode. Pressing the Preset button changes to Recall Preset mode.

•There is one audio level setting per input. The audio level setting is shared by the left and right audio inputs.

•The audio level settings are stored in non-volatile memory. When power is removed and restored, the audio level settings are retained.

•Exiting Audio mode by pressing the Audio button always returns the I/O conﬁguration to RGBHV and audio selected for conﬁguration.

Extron electronic MVX 128 manual DB when blinking slowly, 2 dB, When blinking quickly, and 3 dB