Extron electronic MVX 128 manual Preferences menu, Ties shown as lines

Name presets — Allows you to assign a name to each of the 32 memory presets.

NPreset names are limited to 12 upper- and lower-case alphanumeric characters, space, and the _ : = and / characters.

NThe following characters are invalid in preset names: + ~ , @ = ‘ [ ] { } < > ’ “ ; : \ and ?.

Show RS-232 strings — Displays the ASCII commands that are used by the current configuration. You can refer to these for RS-232 programming.

Initialize — Initializes and clears any or all of the following: ties, presets, audio configuration, preset names, icon names, and icons.

Preferences menu

Immediate changes — Causes configuration changes to take effect immediately.

Hold/verify changes — Delays implementation of configuration changes until the Changes – Take button is pressed.

Ties as lines — Displays ties as lines (figure 5-7).

Figure 5-7 — Ties shown as lines

Ties as crosspoints — Displays ties as a matrix of inputs and outputs (figure 5-8). Ties that have been made are indicated as amber (video and audio), green (video only), and red (audio only) boxes. Ties that will take effect when you click on the Take button are indicated by +. Ties that will be broken when you click on the Take button are indicated by –.

Figure 5-8 — Ties shown as crosspoints

MVX 128 A VGA Matrix Switchers • Matrix Software 5-9