Extron electronic MVX 128 manual

Operation, cont’d

2.	Press and hold the Preset button for approximately 2 seconds until the Preset
	LED blinks (figure 3-34).

All input and output LEDs with assigned presets light.

If you then save the configuration to a lit preset number,

the configuration data at that preset location will be overwritten.

Press and hold the Preset button until the Preset LED blinks.

Release the Preset button.

2 seconds

Lit

(Preset Assigned)

Unlit

(Preset Unassigned)

Output

LEDs

PRESET	PRESET	1	2	3	4
		Preset 13	Preset 14	Preset 15	Preset 16

= Blinking LED

Figure 3-34 — Enter Save Preset mode

3. Press and release the Output 1 button (figure 3-35).

Press and release the Output 1 button.

The LED blinks to indicate that this preset number is selected but not saved.

CONTROL

1	2	3	4
Preset 13	Preset 14	Preset 15	Preset 16

= Blinking LED

ENTER PRESET

The Enter LED blinks to indicate the need to save the preset.

The Preset LED continues to blink.

Figure 3-35 — Select the preset

4. Press and release the Enter button (figure 3-36). The current configuration is now stored in memory location 13.

Press the Enter button to save the preset.

CONTROL

ENTER PRESET VIEW ESC

The Enter and Preset LEDs return to the unlit state.

All input LEDs return to the unlit state.

Figure 3-36 — Press the Enter button

3-22 MVX 128 A VGA Matrix Switchers • Operation