Miele 09 730 840 To switch the fan on, To select a power level, Run-onoption, Hob lighting

Operation (Manual mode)

Cooking without the Con￿ctivity 2.0 function (Manual mode)

The Con￿ctivity 2.0 function must not be activated for this mode.

However, manual operation is temporarily possible even if the Con￿ctivity 2.0 function is activated (see "Leaving automatic mode temporarily").

To switch the fan on ￿

￿Touch the On/Off sensor ￿.

The fan will switch on at power level 2.

To select a power level

Depending on the intensity of the cooking vapours, levels 1 to 3 are usually sufficient for normal cooking.

￿Select the level you require by touching the 1, 2 or 3 sensor.

Intensive setting

￿For short periods of cooking food with intensive vapours and a strong aroma, e.g. when searing meat, you may wish to select level IS, the Intensive setting.

Run-on option "5￿15"

It is advisable to leave the fan running for a few minutes after cooking has finished to neutralise any lingering odours in the air.

The fan can be set to switch off automatically after 5 or 15 minutes.

￿After cooking has finished, touch the Run-on option sensor ￿ whilst the fan is still running

–Touch once = The fan will switch off after 5 minutes (5 ￿ will light up).

–Touch twice = The fan will switch off after 15 minutes (￿15 will light up).

￿ If you touch the Run-on sensor ￿ again, the fan remains on (5 ￿15 goes out).

To switch the fan off ￿

￿Touch the On/Off sensor ￿ to switch the fan off.

Hob lighting ￿

The hob lighting can be switched on and off independently of the fan.

￿Touch the hob lighting sensor ￿.

21