Brocade Communications Systems IP250 user manual Duplicating a payload configuration

24 Duplicating a payload configuration

Duplicating a payload configuration

You can create a payload configuration by copying an existing configuration.

1.Select Configure > Configuration Wizard.

2.Select a configuration from the Product Configurations list.

3.Click Duplicate.

The Copy Configuration dialog box displays.

4.Enter a name for the new payload configuration. If you do not enter a name, the Management application assigns the name “XXX copy”, where XXX is the name of the original configuration.

5.Click OK to close the dialog box.

You can then use the Edit button to make changes to the payload configuration.

Modifying a payload configuration

You can add payloads to a configuration, delete payloads from a configuration, and modify existing payloads in a configuration.

You can also change the deployment targets, properties, and schedule.

1.Select Configure > Configuration Wizard.

2.Select a configuration from the Product Configurations list.

3.Click Edit.

The Select Payload pane displays. The payloads that currently exist in the configuration are checked.

On the left side of the wizard, the Steps area displays the existing payloads and the deployment items you can change (targets, properties, schedule), as shown in Figure 301 on page 775.

774	Brocade Network Advisor IP User Manual
	53-1003056-01