Brocade Communications Systems IP250 user manual Configuring a TACACS+ server

12 AAA Settings tab

3.Add or edit a TACACS+ server by referring to “Configuring a TACACS+ server” on page 386.

4.Rearrange the TACACS+ servers in the table by selecting a server and click the Up or Down button to move it.

5.Delete a TACACS+ server by selecting the server and click Delete.

6.Test the established active connection with the TACACS+ server by clicking Test. The Test Authentication dialog box displays.

7.Enter your user ID and password and click Test.

Test verifies your user ID and password for the local database and verifies user privileges on the Management application server.

8.Set secondary authentication by selecting one of the following options from the Secondary Authentication list:

•Local Database

•None

9.Set the fall back condition to secondary authentication by selecting one of the following options from the Fail Over Option list:

•TACACS+ Server Not Reachable

•TACACS+ Server Authentication Failed

10.Set the authorization preference by selecting one of the following options from the Authorization Preference list:

•Local Database

•Primary Authentication Server

11.Click Apply to save the configuration.

To display the authentication audit trail, refer to “Displaying the client authentication audit trail” on page 391.

12.Click Close to close the Server Management Console.

Configuring a TACACS+ server

To add or edit a TACACS+ server, complete the following steps.

1.Choose one of the following options from the AAA Settings tab:

•Click Add.

•Select an existing TACACS+ server and click Edit.

The Add or Edit TACACS+ Server dialog box displays (Figure 145).

386	Brocade Network Advisor IP User Manual
	53-1003056-01