Brocade Communications Systems IP250 CLI Templates Network OS Configure Extended L2 Access List

G	CLI Templates
		TABLE 39	Network OS – Configure Extended L2 Access List
		Feature	Description	CLI Commands
		ACL	This template is used to configure	mac access-list extended $<extdAclNameSTRING>
			an extended L2 ACL on Network OS	deny $<mac1MAC> $<mask1MAC> any
			products running 3.0 or later.	deny any $<mac2MAC> $<mask2MAC>
				deny $<mac3MAC> $<mask3MAC> $<mac4MAC>
				$<mask4MAC>
				permit $<mac5MAC> $<mask5MAC> $<mac6MAC>
				$<mask6MAC>
				permit any any
		TABLE 40	Network OS – Configure Inter Frame Gap Violation Fencing
		Feature	Description		CLI Commands
		Network	This template is used to configure		threshold-monitor interface custom type Ethernet area IFG
		OS	high threshold value to fence an		threshold timebase $<TimebaseSTRING> high-threshold
			interface when Inter Frame		$<HighThresholdValueINTEGER>
			Gap(IFG) minimum length (typical		threshold-monitor interface custom type Ethernet area IFG
			value is 12) violation occurs.		alert above highthresh-action fence
			Possible values for timebase are		threshold-monitor interface apply custom-monitoring
			day, hour, minute and none.
		TABLE 41	Network OS – Configure Inter Frame Gap Violation Monitor
		Feature	Description		CLI Commands
		Network OS This template is used to configure			threshold-monitor interface custom type Ethernet area IFG
			threshold and alert values for Inter		threshold timebase $<TimebaseSTRING> high-threshold
			Frame Gap(IFG) minimum length		$<HighThresholdValueINTEGER> low-threshold
			(typical value is 12) Violation		$<LowThresholdValueINTEGER> buffer
			monitoring.		$<BufferValueINTEGER>
			Possible values for timebase are		threshold-monitor interface custom type Ethernet area IFG
			day, hour, minute and none.		alert above highthresh-action
			Buffer value cannot be more than		$<AboveHighThreshActionSTRING> lowthresh-action
			average of high plus low threshold.		$<AboveLowThreshActionSTRING>
			Supported Values for High and		threshold-monitor interface custom type Ethernet area IFG
			Low Threshold Action Parameters		alert below highthresh-action
			are email, raslog, all, and none.		$<BelowHighThreshActionSTRING> lowthresh-action
					$<BelowLowThreshActionSTRING>

threshold-monitor interface apply custom-monitoring

1346	Brocade Network Advisor IP User Manual
	53-1003056-01