VLAN classifier configuration

16

FIGURE 189 Edit Switch dialog box, VLAN Classifiers tab

4.Click the Add button under the Available Rules list.

The Add Rules dialog box displays, as shown in Figure 190.

FIGURE 190 Add Rules dialog box

The Rule ID field is pre-populated with the next available rule ID number.

5.Keep the rule ID number as it is, or change the number using a value from 1 through 256.

6.Select a rule type. Valid rule types are MAC (MAC address-based rule) and Proto (802.1Q protocol-based rule).

7.If Ethernet Type is selected as the protocol rule type, enter any valid four-digit hexadecimal value within the allowed range of 0x0000 through 0xFFFF. For the other Proto options, the hex ID value is hard-coded as follows:

ARP — 0x0808

IP — 0x8881

IPv6 — 0x86DD

8.Select an encapsulation type from the list. Options include Ethv2, nosnapllc, and snapllc. The Encapsulation list only accepts a value when Protocol is selected as the rule type.

Brocade Network Advisor IP User Manual

511

53-1003056-01

 

Page 563
Image 563
Brocade Communications Systems IP250 user manual Vlan classifier configuration