Brocade Communications Systems IP250 user manual Top Port Sync Losses monitor

7 Performance monitors

•Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) — Displays one of the following:

-Connected Port — The ISL or IFL port on the connected device. Click to launch the switch port properties dialog box.

-Initiator — The initiator port on the connected device. Click to launch the device properties dialog box.

-Target — The target port on the connected device. Click to launch the device properties dialog box.

•Runtime Errors— The number (error count) of runtime errors for the duration specified in the monitor.

•Runtime Errors/sec — The number (error rate) of runtime errors per second for the duration specified in the monitor.

•Product — The product affected by this monitor.

•Type — The type of port (for example, U-Port).

•Identifier — The port identifier.

•Port Number — The port number.

•State — The port state (for example, Enabled).

•Status — The port status (for example, Up).

•Refreshed — The time of the last update for the monitor.

To edit a port performance monitor, refer to “Editing a preconfigured performance monitor” on page 263.

Top Port Sync Losses monitor

The Top Port Sync Losses monitor (Figure 101) displays the top ports with synchronization failures in a table.

FIGURE 101 Top Port Sync Losses monitor

The Top Port Sync Losses monitor includes the following data:

250	Brocade Network Advisor IP User Manual
	53-1003056-01