Brocade Communications Systems IP250 user manual Configuring event action e-mail settings

37 Event action definitions

Configuring event action e-mail settings

The Action Group - E-Mail Settings pane of the Add Event Action dialog box, shown in Figure 490, allows you to select e-mail recipients from a list, add new e-mail recipients, and compose e-mail messages.

FIGURE 490 Action Group - E-Mail Settings pane of the Add Event Action dialog box

To configure the e-mail settings for the event action, complete the following steps.

1.Select the Management application user to whom the e-mail message will be sent from the Available Recipients list, and click the right arrow button to move the recipient to the Selected Recipients list.

NOTE

Make sure the user you select has an e-mail address defined in a user account.

2.(Optional) Add additional e-mail recipient addresses in the Other Recipients field. Separate multiple e-mail addresses with a semicolon. At least one e-mail address must be specified by either selecting an available recipient from the list (step 1) or entering an e-mail recipient.

3.If you want the e-mail message for the alert to display a description on the subject line, enter the text in the Subject Line field.

NOTE

You can create a prefix that is included in the subject line of every e-mail alert that the Management application sends. The prefix is defined in the configuration.properties file. The prefix plus the text entered in this field cannot exceed 255 characters.

4.If you want a prologue to be inserted at the beginning of the e-mail message, enter up to 255 characters in the Body Prologue field. The event action message follows the prologue.

1178	Brocade Network Advisor IP User Manual
	53-1003056-01