Brocade Communications Systems IP250 Editing an Invalid CRCs threshold, Editing thresholds

20 Editing thresholds

Editing an Invalid CRCs threshold

NOTE

This threshold is only available for Fabric OS devices.

NOTE

This feature requires a Trial or Licensed version.

Use to block a port when the Invalid CRCs Threshold violation type meets the Fabric OS switch threshold.

To edit an Invalid CRCs threshold, complete the following steps.

1.Select Monitor > Fabric Watch > Port Fencing. The Port Fencing dialog box displays.

2.Select Invalid CRCs (Fabric OS only) from the Violation Type list.

3.Select the threshold you want to change and click Edit. The Edit Invalid CRCs Threshold dialog box displays.

4.Complete step 4 through step 7 in “Adding an Invalid CRCs threshold” on page 679.

5.Click OK on the Edit Invalid CRCs Threshold dialog box.

If the threshold has already been assigned to ports, an “Are you sure you want to make the requested changes to this threshold on “X” ports?” message displays. Click OK to close.

To assign this threshold to fabrics, switches, or switch ports, refer to “Assigning thresholds” on page 685.

6.Click OK on the Port Fencing dialog box.

Editing an Invalid Words threshold

NOTE

This threshold is only available for Fabric OS devices.

NOTE

This feature requires a Trial or Licensed version.

Use to block a port when the Invalid Word Threshold violation type meets the Fabric OS switch threshold.

To edit an Invalid Words threshold, complete the following steps.

1.Select Monitor > Fabric Watch > Port Fencing. The Port Fencing dialog box displays.

2.Select Invalid Words (Fabric OS only) from the Violation Type list.

3.Select the threshold you want to change and click Edit. The Edit Invalid Words Threshold dialog box displays.

4.Complete step 4 through step 7 in “Adding an Invalid Words threshold” on page 680.

688	Brocade Network Advisor IP User Manual
	53-1003056-01