Brocade Communications Systems IP250 Copying a standard L3 ACL configuration, Click Duplicate

Layer 3 access control list policy 18

Copying a standard L3 ACL configuration

To copy a standard L3 ACL configuration, complete the following steps.

1.Select the device and select Configure > Security > L3 ACL > Product. The Device_Name - L3 ACL Configuration dialog box displays.

2.Select the standard ACL configuration you want to copy in the ACLs list.

3.Click Duplicate.

The Duplicate - L3 ACL Configuration dialog box displays with the default name ‘Copy of Original_Name’.

4.Enter a new name or number for the ACL in the ACL Name/Number field.

5.To edit an existing rule, complete the following steps.

a.Select the rule you want to edit in the ACL Entries list and click the left arrow button. The rule displays in the ACL Entry area.

b.Complete step 5 through step 10 in “Creating a standard L3 ACL configuration” on page 581.

The updated ACL rule displays in the ACL Entries list. To update additional rules for the same ACL, repeat step 4.

6.To add a new rule, complete step 5 through step 10 in “Creating a standard L3 ACL configuration” on page 581.

The updated ACL rule displays in the ACL Entries list. To update additional rules for the same ACL, repeat step 5.

7.To delete an existing rule, select the rule you want to delete in the ACL Entries list and click the left arrow button.

8.Use the Up and Down arrow buttons to rearrange the ACLs in the ACL Entries list.

9.Click Close on the L3 ACL Advanced Settings dialog box to close.

10.Click OK on the Duplicate - L3 ACL Configuration dialog box.

11.To set the configuration type and operations, refer to “Configuring the ACL configuration type and operations” on page 597.

12.(Ethernet routers only) To set the hit statistics duration, refer to “Configuring hit statistics” on page 597.

13.To deploy the configuration, click OK on the Device_Name - L3 ACL Configuration dialog box.

The Deploy to Products - L3 ACL dialog box displays. To deploy the configuration, refer to “Security configuration deployment” on page 629.

Creating an extended L3 ACL configuration

To create an extended L3 ACL configuration, complete the following steps.

1.Select the device and select Configure > Security > L3 ACL > Product. The Device_Name - L3 ACL Configuration dialog box displays.

2.Select New IPv4 from the Add list.

Brocade Network Advisor IP User Manual	585
53-1003056-01