Editing a Call Home center

10

Editing a Call Home center

To edit a Call Home center, select from the following procedures:

 

Editing the IBM Call Home center

349

Editing an e-mail Call Home center

350

Editing the EMC Call Home center

354

Editing the HP LAN Call Home center

355

Editing the IBM Call Home center

To edit the IBM Call Home center, complete the following steps.

1. Select Monitor > Event Notification > Call Home. The Call Home dialog box displays.

2. Select IBM in the Call Home Centers list.

3. Click Edit Centers (beneath the Call Home Centers list).

The Configure Call Home Center dialog box displays (Figure 137).

FIGURE 137 Configure Call Home Center dialog box (IBM option)

4.Make sure the Call Home center type you selected displays in the Call Home Centers list. If the Call Home center type is incorrect, select the correct type from the list.

5.Select the Enable check box to enable this Call Home center.

6.Set the time interval at which to check the Call Home center by selecting the Set heartbeat interval at ___ days (1-28)check box and entering the interval in the field.

7.Enter how long you want to wait before timing out the heartbeat interval in the Time Out field. The default is 60 seconds.

Brocade Network Advisor IP User Manual

349

53-1003056-01

 

Page 401
Image 401
Brocade Communications Systems IP250 user manual Editing a Call Home center, Editing the IBM Call Home center