Brocade Communications Systems IP250 user manual Changing an option on a device’s shortcut menu

11 Changing an option on a device’s shortcut menu

11. Click OK to save your work and close the Setup Tools dialog box.

Changing an option on a device’s shortcut menu

You can change the parameters for a tool that displays on a device’s shortcut menu.

To edit an option to the device’s shortcut menu, complete the following steps.

1.Select Tools > Setup.

The Setup Tools dialog box displays.

2.Click the Product Menu tab.

The Product Popup Menu Items table displays all configured shortcut menu options.

3.Select the menu item you want to change in the Product Popup Menu Items table.

The settings for the selected menu item display in the fields at the top of the dialog box.

4.Edit or select the text in the Menu Text list as you want it to appear on the menu.

5.Choose one of the following options:

-To display the menu option only for devices that meet the conditions listed, select the Match Conditions option.

-To display the menu option on the shortcut menus for all devices, select the All option. If you select All, skip to step 8. Otherwise, continue to step 5.

6.Change the type in the Condition 1 Property name list.

7.Change the value for the selected property in the Condition 1 Value field.

8.(Optional) Change the Condition 2 Property type or edit the Value for that property type (Condition 1 AND Condition 2 must be true) to edit a second condition to be simultaneously true.

NOTE

To set up a condition where Condition 1 OR Condition 2 must be true, define two menu items, one for each condition.

9.Select the tool from the Tool list that you want to launch, or click Define to add a tool. To specify a new tool, refer to “Adding a tool” on page 367.

10.Select the Append device ID check box to specify the parameter used when opening the tool.

-To specify that the device’s IP address should be used when opening the tool, select the IP Address option.

-To specify that the device’s Node WWN should be used when opening the tool, select the Node WWN option.

11.Click Edit.

NOTE

You must click Edit before clicking OK; otherwise, your changes will be lost.

12.Click OK to save your work and close the Setup Tools dialog box.

372	Brocade Network Advisor IP User Manual
	53-1003056-01