Brocade Communications Systems IP250 user manual Adding a Protocol Error threshold

Adding thresholds 20

8.Click OK to add the Link Resets threshold to the table and close the Add Link Reset Threshold dialog box.

To assign this threshold to fabrics, switches, or switch ports, refer to “Assigning thresholds” on page 685.

9.Click OK on the Port Fencing dialog box.

Adding a Protocol Error threshold

NOTE

Only available for Fabric OS products.

NOTE

This feature requires a Trial or Licensed version.

Use this type of threshold to block a port when one of the following ISL protocol errors meet the threshold:

•ISL Bouncing–ISL has repeatedly become unavailable due to link down events.

•ISL Segmentation–ISL has repeatedly become segmented.

•ISL Protocol Mismatch–ISL has been repeatedly put into the Invalid Attachment state due to a protocol error.

To add a Protocol Error threshold, complete the following steps.

1.Select Monitor > Fabric Watch > Port Fencing. The Port Fencing dialog box displays.

2.Select Protocol Error from the Violation Type list.

3.Click Add.

The Add Protocol Error Threshold dialog box displays.

FIGURE 248 Add Protocol Error Threshold dialog box

4.Enter a name for the threshold in the Name field.

5.Select the Fabric OS check box.

Brocade Network Advisor IP User Manual	683
53-1003056-01