Brocade Communications Systems IP250 user manual Source address format Condition

14 Ethernet fabric traceroute

2.Enter a MAC address, VM name, or IP address in the Source field or click the Source button to select or search for a source address from the Select Source - Traceroute dialog box (see Figure 167).

FIGURE 167 Select Source - Traceroute dialog box

In the Select Source - Traceroute dialog box, you can either search from the Available MAC Addresses list or select a row containing the required source MAC address, VM name, or IP address and click OK. This list contains all the discovered port MAC addresses (host or device) connected to the VCS cluster.

The format of the selected source address is displayed based on the conditions in the following table.

Source address format	Condition
MAC address (VM name) - if VM name exists	When a MAC address is entered and the focus is lost.
MAC address (VM name) - if VM name exists	When a VM name is entered and the focus is lost.
IP address (VM name) - if VM name exists	When an IP address is entered and the focus is lost.

3.Enter a MAC address, VM name, or IP address in the Destination field or click the Destination button to select or search for a destination address from the Select Destination - Traceroute dialog box.

In the Select Destination - Traceroute dialog box, you can either search from the Available MAC Addresses list or select a row containing the required destination MAC address, VM name, or IP address and click OK. This list contains all the discovered port MAC addresses (host or device) connected to the VCS cluster.

446	Brocade Network Advisor IP User Manual
	53-1003056-01