Brocade Communications Systems IP250 SLP on Unix systems, SLP file locations on Unix systems

SMI Agent Configuration Tool 12

,(RegisteredProfilesSupported=SNIA:SMI-S,DMTF:Profile Registration,SNIA:FC

HBA,DMTF:LaunchInContext,SNIA:Fan,SNIA:Fabric,SNIA:Switch,DMTF:Role Based

Authorization,SNIA:Power Supply,SNIA:Sensors,SNIA:Server)

•slptool findattrs service:wbem:http://IP_Address:Port

NOTE

Where IP_Address:Port is the IP address and port number that display when you use the slptool findsrvs service:wbem command.

Use this command to verify that the Management application SMI Agent SLP service is properly advertising its WBEM SLP template over the HTTPS protocol.

Example output:

Install_Home\cimom\bin>slptool findattrs service:wbem: https://10.24.35.61:5989(template-type=wbem),(template-version=1.0),(template -description=This template describes the attributes used for advertising WBEM Servers),(template-url-syntax=https://10.24.35.61:5989),(service-hi-name=WBEM Solutions J WBEM Server),(service-hi-description=WBEM Solutions J WBEM Server),(service-id=WBEMSolutions:f1f65c3b-27f1-4b70-9ced-e412e93a8d5e),(Comm unicationMechanism=CIM-XML),(OtherCommunicationMechanismDescription =null),(InteropSchemaNamespace=interop),(ProtocolVersion=1.2),(FunctionalProf ilesSupported=Basic Read,Basic Write,Schema Manipulation,Instance Manipulation,Association Traversal,Query Execution,Qualifier Declaration, Indications),(FunctionalProfileDescriptions=null), (MultipleOperationsSupported=true),(AuthenticationMechanismsSupported=Basic), (AuthenticationMechanismDescriptions=null),(Namespace=root/brocade1,interop), (Classinfo=0,0),(RegisteredProfilesSupported=SNIA:SMI-S,DMTF:Profile Registration,SNIA:FC HBA,DMTF:LaunchInContext,SNIA:Fan,SNIA:Fabric, SNIA:Switch,DMTF:Role Based Authorization,SNIA:Power Supply,SNIA:Sensors, SNIA:Server)

SLP on UNIX systems

This section describes how to verify the SLP daemon on UNIX systems.

SLP file locations on UNIX systems

•SLP log — Install_Home/cimom /cfg/slp.log

•SLP daemon — Install_Home/cimom /cfg/slp.conf

You can reconfigure the SLP daemon by modifying this file.

•SLP register — Install_Home/cimom /cfg/slp.reg

You can statically register an application that does not dynamically register with SLP using SLPAPIs by modifying this file. For more information about these files, read the comments contained in them, or refer to http://www.openslp.org/doc/html/UsersGuide/index.html.

Verifying SLP service installation and operation on UNIX systems

1.Open a command window.

2.Type % su root and press Enter to become the root user.

3.Type # Install_Home/cimom/bin/slptool findsrvs service:service-agent and press Enter to verify the SLP service is running as a Service Agent (SA).

Brocade Network Advisor IP User Manual	399
53-1003056-01