Fabric Watch widgets

7

Violation Count — The total number of Fabric Watch rule violations for each category. Always displays whether or not there is a violation.

Network Object Count — The number and network object type (such as switch, virtual machine, port, trunk, and so on) with a Fabric Watch violation for each category. Always displays whether or not there is a violation.

Refreshed — The time of the last update for the widget.

Customizing the Out of Range Violations widget

You can customize the widget to display violations for a specific fabric or group and time frame.

To display data for a specific fabric or group, refer to “Setting the network scope” on page 220.

To display data for a specific duration, refer to “Setting the data display time frame” on page 222.

Sort the contents by clicking the column header. Click the same column header again to reverse the sort order.

Port Health Violations widget

The Port Health Violations widget (Figure 93) displays the number of violations for each product based on the selected fabric and a specified time range. There are four port health violation widgets: All, ISL, Initiator, and Target.

FIGURE 93 Port Health Violations widget

The Port Health Violations widget displays the following data for each product:

Severity icon/port count/widget title — The color of the worst severity and the number of products with that severity displays before the widget title.

Product — A product label such as product name, IP address, node WWN, domain ID, or zone alias.

Port — A port identifier such as port name, number, address, WWN, user port number, or zone alias.

NOTE

All non-FC ports display either the MAC address or the port name instead of WWN.

Brocade Network Advisor IP User Manual

235

53-1003056-01

 

Page 287
Image 287
Brocade Communications Systems IP250 Port Health Violations widget, Customizing the Out of Range Violations widget