Brocade Communications Systems IP250 user manual 53-1003056-01

3 Default IP user credentials

5.Enter an enable prompt user name and password by selecting Read/Write Enable Prompt from the Credential Type list and completing the following steps.

FIGURE 16 Read/Write Enable Prompt

a.Enter a unique label to identify the credentials in the Display Label field.

This label can be from 1 through 200 characters long, case sensitive, and allows all printable ASCII characters.

b.Enter the user name in the User ID field.

c.Enter the user password in the Password field.

d.Click the right arrow button.

e.If the devices use multiple user names and passwords, use the Up or Down buttons to place the most commonly used at the top of the Enable Prompt list to make discovery run more efficiently.

6.Enter a super user password by selecting Enable Super User from the Credential Type list and completing the following steps.

FIGURE 17 Enable Super User

a.Enter a unique label to identify the credentials in the Display Label field.

This label can be from 1 through 200 characters long, case sensitive, and allows all printable ASCII characters.

b.Enter the super user password in the Password field.

c.Click the right arrow button.

d.If the devices use multiple user names and passwords, use the Up or Down buttons to place the most commonly used at the top of the Enable Super User list to make discovery run more efficiently.

7.Click Apply to save your work.

54	Brocade Network Advisor IP User Manual
	53-1003056-01