Brocade Communications Systems IP250 user manual Deleting an event action definition

37 Event action definitions

3.Click Edit to display the Edit Event Action dialog box.

4.Make the changes you want to make to the definition. You can perform this action in any of the panes of the Add Event Action dialog box.

5.Click Finish to save your definition.

Deleting an event action definition

To delete an event action definition, complete the following steps.

1.Select Monitor > Event Processing > Event Actions. The Event Actions dialog box displays.

2.Select the definition that you want to delete from the Event Actions list.

3.Click Delete.

A message displays asking you to confirm the deletion request.

4.Click Yes to delete the definition, or No to cancel the request.

Configuring event actions for Snort messages

To configure an event action for Snort messages, complete the following steps.

1.From the Identification pane of the Add Event Action dialog box, click Next to advance to the Events pane. See “Creating an event action definition” on page 1166 for complete instructions on event actions.

The Events pane of the Add Event Action dialog box displays, shown in Figure 491. Snort® Message is the default in the Show list.

FIGURE 491 Events pane of the Add Event Action dialog box

1180	Brocade Network Advisor IP User Manual
	53-1003056-01